1. Tune before each treatment. The tuning point may vary each day according to the temperature and humidity, as well as the layout of the machine. When Spooky2 Scalar in operating, it becomes part of the environment, working in harmony with the surroundings. The process of tuning Spooky2 Scalar ensures optimum results. Learn more factors that can affect tuning points and how to know Spooky2 Scalar is tuned correctly from here.
2. The Transmitter and Receiver should have their lids facing each other. The reason for this configuration is so the signal does not go over the top of the coils in the box. We highly recommend this placement of the lids to run the Scalar. It may work if positioned differently, but it is not at its most efficient position.
3. Keep the link cable between the Transmitter and Receiver away from metal. Please do not roll the cable if the cable is long. Metal absorbs the energy flowing through the link cable, reducing the signal strength. The optimum frequency will change as a result.
4. Use the Transmitter Tuning Light for tuning. The Receiver Light can be used to confirm that a scalar field has been established. After tuning, turn the Receiver Light on. It will illuminate when a scalar field is present. The Receiver Light only needs to be dimly lit. It does not need to be at its brightest intensity. Turn the Receiver Light off during scalar treatments, as it takes energy from the scalar field. Discover how to know if scalar field is present when Receiver Light is off from here!
5. Drink plenty of pure water. Ideally, you should drink six to eight pints a day, half of it before noon. The water flushes toxins and dead organisms out of your body more quickly, and it improves your electrical conductivity. If you feel nauseous, faint, dizzy, or have flu-like symptoms or headaches after exposures to the scalar field, please drink lots of pure water or lemon water and shorten your future Spooky2 Scalar session times appropriately.
6. It’s best not to share the Scalar field with anyone who has serious illness. Please check here for more details!
7. People who are pregnant or have a pacemaker should not use Spooky2 Scalar.
My cats like to lay on the scalar boxes. I think I am being sent cat scalar waves.
Dear Sebastian Craynon, thanks for your sharing. Some users have shared in scalar group and their pets like dogs or cats even horses like scalar energy.
If the link cable cannot be near metal, does this mean the cable cannot be under your metal bed frame ? In this case would you run the cable around the bed to avoid the metal bed frame if you want to sleep between the field?
My Scalar and is on its way and I want to do it right.
Thanks-
Dear Jan, it doesn’t matter if you don’t keep the link cable touch the metal.
If something is placed on the transmitter coil will its energy be transmitted to the receiver coil or a sample target on the receiver coil.
No, Richard Cerrone. You need to put the substances on the receiver coil to transmit the healing information. And you can put a glass of water on the transmitter coil to imprint the information. You can learn more from here: https://www.spooky2scalar.com/where-to-place-substances-during-scalar-treatment/