Scalar Advice

Notes for Using Spooky2 Scalar

Notes for Using Spooky2 Scalar

1. Warm-up unit for 15-30 minutes before tune/use. If you move the machine, and it’s already warm, you do not need to wait before tuning.

2. Tune before each treatment. The tuning point may vary each day according to the temperature and humidity, as well as the layout of the machine.

3. There are two tuning frequency points. Scalar is strongest when tuned to the higher of the two, which is usually between 5 MHz and 7 MHz. (Click here to learn more about Spooky2 Scalar Tuning)

4. The Transmitter and Receiver should have their lids facing each other.

5. Try to keep the link cable between the Transmitter and Receiver away from metal.

6. The cable that links the two boxes is 10 feet in length. You can use a longer cable. Ensure it is a single conductor cable that uses banana plugs on each end. You can also buy longer link cable from here.

7. The field is shaped like a Zeppelin. The further the two boxes, the larger the field. The field has a diameter of approximately 3-4 ft when the boxes are 6 feet apart.)

8. The scalar field strength does not follow the inverse square law — meaning it does not get weaker with distance.

9. The Scalar field is a restorative field that can both heal and kill without augmentation. When augmented by a substance or rife frequency, effects can be focused. Scalar fields are an information-rich field.

10. You can place crystals with the intent on the Receiver coil. This intent may boost the manifestation capabilities of the scalar field.

11. The frequency signature of a substance on the Receiver coil is transferred to the Transmitter coil. For example, an essential oil can be placed on the Receiver coil(input coil) and a clear quartz crystal on the Transmitter(output coil). The crystal receives the healing qualities of the essential oil, which is passed to anyone carrying the crystal.

12. People who are pregnant or have a pacemaker should not use Spooky Scalar.

13. Overnight treatments are perfectly safe. You do not get “Frequency Fatigue” from overexposure to Scalar fields. Your body takes what it needs and disregards the rest.

14. It is best not to share the Scalar field with anyone who has serious illness.

Notes for Using Spooky2 Scalar

11 thoughts on “Notes for Using Spooky2 Scalar

  1. Michel Bouriez says:

    Bonjour peux t’on se servir d’une photographie pour faire un soin avec le scalar !!!

  2. Charles Liner says:

    In point 4 of the notes above it says: When Spooky2 Scalar is tuned correctly, the lights on the coil tester will barely be lit. In the Spooky2 Scalar Instruction booklet that came with the units it says: Turn the Tuning Adjustment knob anti clockwise until the Tuning Light beside the transmitter coil is at its first maximum brightness. I find that first maximum brightness on the Tuning Light is usually a few clicks below 5.5 MHz, in the 4.8-5.0 MHz range, dimming noticeably above 5.0 MHz, and becoming quite dim near 7 MHz. Is the coil tester something separate from the Tuning Light?

    1. Dear friend, thanks for your questions. This note is for the older version of Scalar. If your Scalar is the new batch, it has the running led light embedded in the Transmitter for tuning which takes the place of the coil tester. In this case, it is more convenient. The function of the coil tester and the embedded led is exactly the same. Turn the Tuning Adjustment knob anticlockwise until the Tuning Light beside the transmitter coil is at its first maximum brightness.

  3. Les Blumling says:

    I would very much like to know a general rule of thumb for a general health enhancement scalar treatment.How many minutes/hours per day and how many times per week.What is a reasonable/adequate treatment length of time and how often per week? Thank You………Les

    1. Hi, Les Blumling. We recommend that you use Scalar for at least 30 mins every day.

  4. Caiphus says:

    I turn the knob until the light comes on, but I noticed that it only takes one clockwise turn for the light to go off…….do I need to turn it two clockwise, if the light turns off after one clockwise turn?

    1. Yes,it’s ok that it takes only one click position clockwise to turn off the light on the Coil Tester. Please make sure that the tuned frequency is between 5.5-7Mhz.

      1. Bruso in 🇦🇺 says:

        I have been tuning mine. To the middle of the brightest led setting usually around 4.35hz. So from what you have written it seems it is too low? Can you comment please?

        1. Dear friend, some people find that frequencies above 6 MHz are ideal. Others discover that their scalar device tunes below 5 MHz. There are many factors that can affect the tuning frequency of the Scalar. There are many factors explaining why the scalar units differ so much. Click here to learn more: https://www.spooky2scalar.com/spooky2-scalar-tuning/ Please be sure that there are two peaks during tuning. The first peak in the indication light indicates that the “ideal” scalar frequency has been found. The frequency range when the light illuminates is quite broad. If you continue to turn the tuning knob anticlockwise, the indication light will extinguish, and then will come back on. This second, lower frequency is the EMF operating frequency. It is the confirmation that the scalar frequency was found in the previous step.

  5. Lawrence Woods says:

    For#4, previously it was recommended that as the practitioner turning the dial reached the point where the tester coil lights were barely lit, that was not the final attunement. We were told to turn the dial clockwise 2 clicks. That would be the true attunement point. So which is the correct instruction?

    1. Normally 2 clicks clockwise would make the light off. If it still does it make it off, then keep turning until it is just off.

Leave a Reply

Your email address will not be published. Required fields are marked *